FAQ - Hapag-Lloyd LIVE

The container is loaded onto a vessel. This can either be the main leg or a feeder vessel. This includes a power-off.

The container is discharged either from an ocean going vessel or a feeder vessel. This includes a power-off.

The container passed the container terminal gate. The unit is moved from truck/railway into the container yard. This includes a power-off.  

The container moves out of the container terminal. This includes a power-off.

As the container is often moved through warm/cold ambient temperature, the temperature inside the container can deviate. During power-offs the unit cannot cool/heat, therefore the temperature will fluctuate in a shorter period. This is perfectly normal.

Another reason could be incorrect stowage of the cargo inside the container. A blocked airflow can lead to temperature
deviations. Certain cargo (climacteric fruits and vegetables) are known to respire – a process which generates heat. Depending on the respiration rate, this will have an impact on the return air temperature.

During defrost cycles, the evaporator motors are turned off. During this period, the coil is freed from ice with heat. This heat will not enter the container as the evaporator motors are not running, however as the return air sensor is located just above the evaporator, the return air sensor will measure relative high temperatures for shorter periods of time. This is perfectly normal.

If the container has an unfortunate malfunction, this will also lead to temperature deviations.  

Internal gate moves can occur when containers are being checked by customs or if the terminal needs to move the container from one stack to another. Furthermore, to prepare ship operations (Loaded), containers will be moved to the ships side.
Internal gate moves always result in a power-off and are perfectly normal.  

Customers can track off-power periods in the dedicated POWER OFF tab. As one glance, customers can visualize all off-power periods, their duration, as well as beginning and start timestamps.

A lack of data could be an indication of a power-off. If it is longer than 1 hour can be easily identified by looking at the gaps on temperature graph lines. If the temperature after the data gap is close to the last record available, we can assume that the cargo temperature was maintained. If we see a deviation and that the pull down is fast afterwards, we can also assume that there was no relevant deviation on the cargo temperature. Cargo weight plays a significant role in maintaining temperature inside a reefer container in case no active cooling.

Power-off events happen for various reasons - change of transport mode, internal gate moves, gate events, or an emergency shut down of the reefer machinery due to malfunctioning of the unit. However, the unit can also be out of the cellular Network, this normally happens during the main leg. Once the container reconnects to the network signal at the first POD, the data during the ocean transit will be retroactively uploaded to the Hapag-Lloyd Application.

In very rare occasions Hapag-Lloyd LIVE, due to monitoring device malfunction, might stop transmitting data even if the reefer container is powered on and working as expected. If you suddenly notice lack of data, although the container is in cellular Network range, please  ‘Contact Us’ at: [email protected]. If we cannot grant you access to the data, we will reimburse the fee previously invoiced.

Events associated with off power periods can be viewed in the Power Off dashboard by just one click. Customers have access to the number of events associated with off power periods as well as a description of each event.  

Customers can view the total number of off-power events as well as total off-power duration in the Power Off dashboard, under “TOTAL POWER OFFS.”  

Yes, Power status is available in the downloaded Excel/ PDF reports for each Timestamp.  

Our focus with Hapag Lloyd LIVE is to be fully transparent with our customers. For this reason, we will only provide you with information on Power Status when we have the data available for the given timestamp. If there is a dash associated with a timestamp under the Power Status column, it means that we do not possess any data for this given period.  

The unit is not inside the Mobile Phone Network. The connection to the cellular Network is normally established a few miles before the coast.  

Return air temperature is the temperature at which the air, after circulating the cargo, returns to the reefer machine. If the set point is below -10, the return air is controlled by the set point.

The return air absorbs heat of the cargo and warm/cold ambient temperatures penetrating the insulation material. In addition, the reefer container could be doing a defrost. See question “What is a defrost and why is my temperature going up” for more information.

Depending on ambient temperatures, respiring cargo and more, the actual temperature can deviate from set point. See question “What is supply air temperature” and “What is return air temperature” for more information.

A narrow gap between supply and return air readings is usually an indication that your cargo is at set point. There are however a few reasons why cargo inside the container can be colder/warmer than set point. These include, for the most part, respiring cargo, hot-stuffing, warm/cold ambient temperatures and blocked airflow.  

Set point temperatures at 5 degrees and below will lead to icing of the evaporator coil as the circulating air will deposit moisture on the cold evaporator (condensation). As the ice builds up, the airflow over the evaporator coil decreases. The reefer is equipped with sensors to measure when to start a defrost. Alternatively, fixed defrost periods can be defined in the controller.

During defrost cycles, the evaporator motors are turned off. During this period, the coil is freed from ice with heat. This heat
will not enter the container as the evaporator motors are not running, however as the return air sensor is located just above the evaporator, this sensor will measure relative high temperatures for shorter periods of time. This is perfectly normal.

Please rest assured that our operations teams and vessel crews are also monitoring your container and will always try to act as soon as possible
If a unit malfunctions one of its components is not working as expected. This can lead to a shut-down of the reefer and subsequent lack of temperature control. In high/low ambient temperature and with possible cargo respiration, the temperature inside the container will differ from set point.    

If the cargo is not loaded at set point temperature, it is normal to see temperature out of range during the first hours. In addition, if the reefer is not on power – e.g. trucked from warehouse to port without gen-set, the temperature can move out of range.  

With Hapag-Lloyd LIVE Plus we offer visibility on the temperature recorded by the USDA probes for Cold Treatment.

Hapag-Lloyd LIVE Plus: CO2 & O2 Set Point and Actual Value data are available only for ExtraFresh or ExtraFresh Plus

The reefer will be communicating in near-real time. When connected to power and in range of a cellular network signal, the reefer will send updates hourly to the Hapag-Lloyd LIVE Application.  

Similar to a mobile phone, the modem needs to be in range of a cellular network antenna to upload the data. When onboard a vessel, if below deck or aprox. 30 KM off shore, a network signal is not available, and there will be no live update from the modem. Once the vessel gets close to land, if mobile network signal can be restored, the modem will upload all data, including its history.

An excel download is available within the Hapag-Lloyd Application for every container, where you have purchased Hapag-Lloyd LIVE.

Yes. You can select the shipment you want to see in the ‘My Hapag-Lloyd LIVE Shipments’ list at the top of the Application.

Notifications are not included in the Product yet. Based on customer’s feedback, additional features of Hapag-Lloyd LIVE will be gradually released.

As per default, all the contracting parties with valid credentials for the Online Business Suite have access to Hapag-Lloyd LIVE data.  

You can send the excel download that is available within the Hapag-Lloyd Application for every container, where you have purchased Hapag-Lloyd LIVE.

The limits result from a dynamic evaluation of the total minimum and maximum values. The selection of the data range adapts itself according to the occurring values. Therefore, the range results from the given values.

Yes. There are reasonable concerns in the industry about the safety of tracking devices. When devices use lithium batteries, they could be viewed as a potential source of ignition. This is critical if the device is in an explosive atmosphere, which can happen around certain dangerous goods.
After extensive consultation with industry experts, we have decided to purchase devices that are designed and certified to the ATEX Zone 2 explosion proof standard to ensure safety for crews, cargo, and vessels.

Data ownership will remain with Hapag-Lloyd, and confidential data regarding transports will not be shared with any unauthorized persons or companies. All software components of “Hapag-Lloyd LIVE”, including those of our technology providers, will have to comply with our high IT security standards and will be regularly reviewed in internal and external audits.

Beginning of 2023 - exact time to be announced.

Once Hapag-Lloyd launches a commercial product in 2023, customers can purchase it per shipment and access data via Hapag-Lloyd’s website (given the container is equipped with a device).

The pricing for “Hapag-Lloyd LIVE” products and services will depend on the level of value created for the customer. Since the “Hapag-Lloyd LIVE” products for dry containers have not yet been fully defined, a decision has not been taken on what the pricing will look like. More information to be provided when the commercial product is launched in 2023.